| Step
1¡G |
Assuming Windows
2000 with network card and
TCP/IP setup correctly, insert
the EnterNet 300 CD and select
the Windows folder from the
CD. |
| Step 2¡G |
Select the Windows140 folder
and run the EnterNet 300 setup
program¡C |
| Step 3¡G |
Choose ¡§Yes¡¨ (Y) to continue
installation¡C |
| Step 4¡G |
After reading the service
agreement, choose ¡§Agree¡¨
and then choose ¡§Next¡¨. |
| Step 5¡G |
Select your installation
method: If you choose Quick
install jump to step 12¡Aotherwise
if you are performing the
Step-By-Step Install, continue
with these instructions. Choose
next to continue.¡C |
| Step 6¡G |
Make sure that before continuing
Enternet 300 installation,
please close all other Windows
applications that may be running.
Choose ¡§Next¡¨ to continue
installation. |
| Step 7¡G |
Select ¡§Yes¡¨ to continue. |
| Step 8¡G |
Select the location you
wish to install the EnterNet
300 software by using ¡§Browse¡¨,
or click ¡§Next¡¨ to use the
default location of C:\Program
Files\NTS\EnterNet 300. |
| Step 9¡G |
Select whether or not you
wish to have the EnterNet
300 Icon installed on your
desktop¡C |
| Step 10¡G |
If you are using Windows
2000, you will receive an
extra prompt here. Choose
¡§Yes¡¨ (Y) to continue¡C |
| Step 11¡G |
If you wish to install Dial-on-Demand
you must have DUN 1.2c or
later installed. If not, continue
to the next step. |
| Step 12¡G |
Click on (Finish) to complete
EnterNet 300 setup. You will
need to restart your computer
before being able to connect
to HiNet ADSL. If you are
using Windows 2000, you do
not need to restart your computer. |
| Step 13¡G |
After restarting your computer,
you should see the EnterNet
300 Icon on your desktop.
Run the program, and select
¡§Create New Profile¡¨ to continue
connecting to HiNet ADSL.
|
| Step 14¡G |
Enter the name of this profile,
such as ¡§HiNet¡¨¡C |
| Step 15¡G |
If you have more than one
network card, you will be
given a choice of which network
card to use. Select the network
card to use with your ADSL
service and click ¡§Next¡¨ to
continue. |
| Step 16¡G |
Enter the user name and
Password given to you by your
ISP and click ¡§Next¡¨¡C |
| Step 17¡G |
Click ¡§Next¡¨ again to continue. |
| Step 18¡G |
You should see that your
ISP has been detected and
a connection has successfully
been made. If not, check to
see if your ATU-R (ADSL Modem)
is functioning correctly and
check to see if all your cables
are connected properly. If
everything is functional,
click ¡§Next¡¨ to continue. |
| Step 19¡G |
Click on ¡§Finish¡¨¡C |
| Step 20¡G |
After the above steps with
the EnterNet 300 software,
you should see a small HiNet
icon. |
| Step 21¡G |
After choosing the HiNet
icon, you will be connected
to HiNet ADSL service. |
| Step 22¡G |
After successfully connecting,
you should see a small icon
in the Windows taskbar¡C |
| Step 23¡G |
To receive more information
about your connection, double
click the small icon and click
on ¡§Details¡¨¡C |
| Step 24¡G |
To disconnect from HiNet
ADSL service, click on ¡§Disconnect¡¨¡C |
| |
|
